M62 use in foam cannon

[audi_nicoya209]

Hey everyone hope you're all safe and healthy first and foremost. Any how my question is can I use M62 in my foam cannon with my pressure washer with proper mixing or should I send just that back and get shampoo plus?

Thanks

[Nick Winn]

Re: M62 use in foam cannon

Hey everyone hope you're all safe and healthy first and foremost. Any how my question is can I use M62 in my foam cannon with my pressure washer with proper mixing or should I send just that back and get shampoo plus?

Thanks

I have not tried that specific wash in a foam cannon but given the design of the product it should work great.

[Murr1525]

Re: M62 use in foam cannon

Hey everyone hope you're all safe and healthy first and foremost. Any how my question is can I use M62 in my foam cannon with my pressure washer with proper mixing or should I send just that back and get shampoo plus?

Thanks

You certainly can... it might not be quite as thick/clingy as a soap for cannons, but will be ok. Just check whatever you diution ratios are (you probably want to dilute a bit in the soap holder) and try for around 128:1.

[audi_nicoya209]

Re: M62 use in foam cannon

I have not tried that specific wash in a foam cannon but given the design of the product it should work great.

Cool I'll post an update a soon as I can

[audi_nicoya209]

Re: M62 use in foam cannon

You certainly can... it might not be quite as thick/clingy as a soap for cannons, but will be ok. Just check whatever you diution ratios are (you probably want to dilute a bit in the soap holder) and try for around 128:1.

My soap holder is 32oz. i know for the bucket 128:1 is the proper ratio ex. 5:1 for 5 gallon bucket but for the container what do you mean 128:1? I found a dilution chart from the chemical guys that has all the mixing measurements for all the typical containers used (16oz, 32oz, 1 gal, 5 gal)

[Murr1525]

Re: M62 use in foam cannon

I mean that if you dilute in the soap holder, you need to combine that with the ratio your sprayer dilutes, depending on what is adjustable on yours.

So if you did 1:4 in the holder, you would set the sprayer at 1:32, get 1:128 total.