Hi from Italy,
I like to improve my stainless polishing skills. I made some mirror blades for my home pinball machine (mirror for the sides of the cabinet). They are cut from stainless AISI304 BA finish, a little less shiny than a grade 8 mirror polished sheet. To get them to a mirror I used my old nxt all metal polish by hand. Took some time but got a very nice mirror finish. Only thing is that I can see some very fine swirls caused by the metal polish, only visible when shining directly a light source. Maybe I need to use another product with a finer grit to get those swirls away? Tell me if have some tips for me. Thank you

Giorgio