Hey everyone, I’ve been gone from the forums for couple of years. I decided to take out my old G100 DA. After polishing with Ultimate polisher with meguires yellow pad. After polishing I noticed marring and leftover polish that would not come off. I did the following:
- power wash/foam/wash
- iron decon
- tar x
- mothers clay 2.0
- wash/ prep-all
- polish w/ DA yellow pad
- prep all
I was wondering if I can wash again, use UC with the DA to correct this? Any help would be greatly appreciated!
- power wash/foam/wash
- iron decon
- tar x
- mothers clay 2.0
- wash/ prep-all
- polish w/ DA yellow pad
- prep all
I was wondering if I can wash again, use UC with the DA to correct this? Any help would be greatly appreciated!
Comment