Tweet
I picked some of this up and have used it 3 times.. and seem to notice what looks like an oil slick on top of the water in my bucket and on the paint.. I mix it per instructions..3 oz of soap and .05 oz of SI02 for 3 gallons of water..am I missing something..any suggestions would be great..
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Hybrid Ceramic Wash and Wax..
Hi 02Rodeo,Originally posted by 02Rodeo View Post
That is the SiO2 boost. Are you having an issue?Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com -
Re: Hybrid Ceramic Wash and Wax..
I fill my bucket up with 3 gallons of water and then mix in the soap and Si02 boost and there is what looks like an oil slick on top of the water..Comment
-
Re: Hybrid Ceramic Wash and Wax..
That is normal. That is the SiO2 Boost Additive.Originally posted by 02Rodeo View PostNick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.comComment
-
Re: Hybrid Ceramic Wash and Wax..
Oh ok .. would I be better off putting in soap and Si02 boost and then putting the water in to mix it up better..thank you in advance for the info....Comment
-
Re: Hybrid Ceramic Wash and Wax..
Just the way it is recommended soap first, then pour in boost is adequate.Originally posted by 02Rodeo View PostNick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.comComment
Comment