If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome to Meguiar's Online. Apologies it looks like you post got cut off. We are having a technical issue, sometimes when certain punctuations are used, the post get's cut off. This should be remedied late this week actually.
Please re-type your question, and I can edit the thread so it appears as your original post.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
I used Meguair’s cleaner wax on my RV with Diamond Shield. It was recommended on Amazon as appropriate for it. It cleaned and shinned up the finish great, but created some minor swirls. I used a battery buffer on the lowest setting and never developed any heat. Any thoughts on how to reduce some of the swirling? Thank you.
I used Meguair’s cleaner wax on my RV with Diamond Shield. It was recommended on Amazon as appropriate for it. It cleaned and shinned up the finish great, but created some minor swirls. I used a battery buffer on the lowest setting and never developed any heat. Any thoughts on how to reduce some of the swirling? Thank you.
Hi Greek65,
I looked up "Diamond Shield" and it appears this is a paint protection film? Is that correct? We typically do not recommend using our traditional cleaners, polishes, or waxes on paint protection films. That said, let's get a bit more specific into what you are seeing, are these cobweb/spider web looks swirl marks or more of a "buffer trail" where you can see the pattern where the machine was used?
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Comment