Here's a list of everything I use that is not made by Meguiars, but hat I would like to see made by Meguiars.
Trim Dye: Let's face it, some trim is too far gone to be cleaned/dressed and needs to be redyed/coated. I currently use Forever Black and AI's ETR. I would definately buy Meguiars if they offered such a product.
6.5" Wool pads: Why did Meguiars stop making them? I currently use another manufacturers, and some of the older buffing pads packages still show the part numbers for them. I find the smaller buffing pads much easier to control when using the rotary, and would use Meguiars wool pads if they brought back the smaller size.
4" SoftBuff foam pads: I'm adding these here again because this is MY definative list of products I'd like Meguiars to make. I wasn't the first to ask, and I'm sure I won't be the last. I just hope Meguiars is listening.
Decontamination Wash: The same as above, I've mentioned this before, but I'll say it again. It is not only a huge time saver when working on thrashed vehicles, but many times I have found it to remove contamination that clay could not. I currently use AI's but shipping is a really pain as there are no local distributors and would HAPPILY buy and use a Meguiars formulated, tested, and approved version.
A real Engine Kote replacement: While Hyper Dressing looks nice for dressing the engine compartment, it doesn't have quite the durability of Engine Kote. Engine Kote also seemed to be a good alternative to waxing/sealing the painted areas of the engine compartment. Please formulate a VOC compliant alternative!
RainX/Aquapel style glass treatment: IMO RainX *****, and aquapel is either too hard to get, or too expensive because you have to buy it by the case.
Real Sheapskin covers for the ultra plush wash mop: I don't think I have to explain this.
I think that about covers it.
Trim Dye: Let's face it, some trim is too far gone to be cleaned/dressed and needs to be redyed/coated. I currently use Forever Black and AI's ETR. I would definately buy Meguiars if they offered such a product.
6.5" Wool pads: Why did Meguiars stop making them? I currently use another manufacturers, and some of the older buffing pads packages still show the part numbers for them. I find the smaller buffing pads much easier to control when using the rotary, and would use Meguiars wool pads if they brought back the smaller size.
4" SoftBuff foam pads: I'm adding these here again because this is MY definative list of products I'd like Meguiars to make. I wasn't the first to ask, and I'm sure I won't be the last. I just hope Meguiars is listening.
Decontamination Wash: The same as above, I've mentioned this before, but I'll say it again. It is not only a huge time saver when working on thrashed vehicles, but many times I have found it to remove contamination that clay could not. I currently use AI's but shipping is a really pain as there are no local distributors and would HAPPILY buy and use a Meguiars formulated, tested, and approved version.
A real Engine Kote replacement: While Hyper Dressing looks nice for dressing the engine compartment, it doesn't have quite the durability of Engine Kote. Engine Kote also seemed to be a good alternative to waxing/sealing the painted areas of the engine compartment. Please formulate a VOC compliant alternative!
RainX/Aquapel style glass treatment: IMO RainX *****, and aquapel is either too hard to get, or too expensive because you have to buy it by the case.
Real Sheapskin covers for the ultra plush wash mop: I don't think I have to explain this.
I think that about covers it.
Comment